Sökresultat

This contribution focuses on the sequential laminate-based modelling approach for the numerical simulation of the complex electromechanical material behaviour of ferroelectric single crystals. The construction of engineered domain configurations by using the method of sequential lamination in order to study the domain evolution and polarisation switching in ferroelectric single crystals has recent

The moisture conditions of a concrete have a decisive effect on several properties and many parts of deterioration processes. The moisture distribution in a concrete structure is determined by the concrete composition, curing and the microclimate in the different parts of the structure. A prediction requires access to data on the time-dependency of the binder reactions, moisture fixation and moist

The recently introduced Gas in Scattering Media Absorption Spectroscopy (GASMAS) technique is applied to the study of various wood samples. Molecular oxygen in the pores of the strongly scattering material is detected using diode laser spectroscopy around 760 nm. Diffuse light propagation in these media is studied by time-dispersion measurements. Furthermore, anisotropy related to the fibre struct

Lipase has been encapsulated in ordered mesoporous materials in a one-step process. The procedure is simple and leads to well structured materials with enzyme loadings higher than those obtained through the post-synthesis approach. In the final bottle-around-the-ship material the enzyme would be entrapped in silica cages whose entrances are smaller than the enzyme itself. Therefore, reagents and p

The formation of two-dimensional (2D)-hexagonal (p6m) silica-based hybrid material with a dual-mesoporosity is investigated in situ using synchrotron time-resolved Small Angle X-ray Scattering (SAXS). The material is synthesized from a mixed micellar solution of a nonionic fluorinated surfactant, RF₈(EO)₉, and a nonionic triblock copolymer, P123. Both mesoporosities, with pores dimensions at 3.3 a

Energy from buildings accounts for almost 40% of global energy-related carbon emissions. A way to reduce both energy consumption in buildings as well as their environmental impact is to use bio-based insulation materials such as cellulose, wood or hemp fiber insulation. Experiences from modern buildings built with a timber-frame structure and insulated with bio-based materials show that these buil

The various types of phase-change materials (PCMs), which absorb or release stored latent heat when they change phases causing cooling and warming effects, are described and the working principles are outlined. The various ways of incorporating PCMs into textiles for protective clothing are explored, and critical factors identified that determine the effectiveness of PCM cooling and warming effect

This article is an ethnographic study of spagyric alchemical practice, sometimes referred to by my informants as “the wet path,” which is centred on the making of elixirs. This article begins with an ethnographic vignette of how alchemy was taught in a group setting and then describes how the author became an alchemist’s apprentice during the course of an evening. Analytical perspectives on this e

The integration of III-V semiconductors with Si in device fabrication is facilitated by the use of nanoscale structures such as nanowires. Nanowires are predominantly grown using Au seed particles; however, the seed material is known to affect the nanowire growth and properties. Here we present growth of GaAs nanowires using three different seed particle materials: Au, Ag, and a AgAu alloy. By com

Abstract: The release of radiolabeled material from regenerating frog sciatic nerves was studied using a multicom‐ partment chamber, in which the ganglia and the outgrowth region, respectively, were separated from the rest of the nerve. The nerves were incubated with radioactive amino acids in the ganglionic compartment, and the material transported to and released at the outgrowth region was col

The X-ray Absorption Fine Structure (XAFS) with its subregions X-ray Absorption Near-edge Structure (XANES) and Extended X-ray Absorption Fine Structure (EXAFS) is a powerful tool for the structural analysis of materials, which is nowadays a standard component of research strategies in many fields. This review covers a wide range of topics related to its measurement and use: the origin of the fine

Kolhydratsystem så som alkylglycosider, cellulosa och cyklodextrin är miljövänliga förnybara material som används inom många områden i dagens samhälle; som bärare av aktiva substanser i läkemedelstabletter, matsmältningsfiber, papper, kosmetika och hygienartiklar för att nämna några. De är fasta substanser uppbyggda av molekyler ordnade i en viss struktur. Med tiden, och eventuell yttre påverkan, In the solid state, molecules are normally ordered in a specific structure. With time, and as a result of influence from the surroundings, solid materials can change their molecular and/or crystal structure and, as a consequence, obtain completely different properties. Water is particularly important in this respect. Adsorption of minuscule amounts of water from the atmosphere may have huge effect

Despite its long history, the Theory of Characteristic Modes has only been utilized in antenna design for perfect electric conductors. This is due to computational problems associated with dielectrics and magnetic materials. In particular, the symmetric form of the PMCHWT surface formulation for the Method of Moments (MoM) solves for both external (real) and internal (non-real) resonances of a str

Materials with heterogeneous microstructures architected across several scales are becoming increasingly popular in structural applications due to unique strength–ductility balance. One of the most popular 3D-architected structure designs is harmonic structure (HS) where soft coarse-grain (CG) islands are embedded in a hard continuous 3D skeleton of ultrafine grains (UFGs). In this work, a series

Mineral building materials suffer from weathering processes such as salt efflorescence, freeze-thaw cycling, and microbial colonization. All of these processes are linked to water (liquid and vapor) in the pore space. The degree of damage following these processes is heavily influenced by pore space properties such as porosity, pore size distribution, and pore connectivity. X-ray computed micro-to

1. In order to prove a copyright exception not contemplated in the Act but based on long-standing practice the defendant must show strong evidence that goes beyond a usual practice in the business.2. The use of a copyright-protected work even in a commercial or marketing context can be of such secondary importance that – notwithstanding that the rights holder has not permitted the use – it would nThe present article grapples with the concept of de minimis in European copyright law in light of the ruling by the Danish Supreme Court in Würtz v Coop Denmark. The article begins with a brief background of the case. The second section delves into the concept of de minimis and its origins and framing in European copyright law. The third section compares the concept to US legislation and case law

In this paper, pure paraffin was mixed with CuO (high thermal conductivity) and Span-80 (as a dispersant). The CuO/paraffin nanocomposite phase-change materials (PCMs) were synthesized with mass fractions of 0.3%, 0.6%, and 1.2%, by a two-step method. Heat-transfer characteristics of the heat-pipe-PCMs module and effects of fan power and heating power on the performance of the cooling module in a

Paperboard has been the basis for packaging materials used to aseptically store and protect food and beverages for a long time. To ensure that there are no bacteria that can spoil the product, sterilizing treatments are made. One such treatment is the retorting process, which involves heating to high temperatures in a pressurized environment of water vapor and dry air. The porous nature of paper m