Filtyp
For ensuring quality of a product it is important to perform hardware testing on a device. The aim of this thesis was to simplify and improve the process for power consumption hardware testing at a company. The result was one semi-automated and one fully automated solution. Another key component was that the system should have high flexibility, everything from the choice of instruments to the test
A new era of precise time measurement came with the atomic clock. The technology is vital to navigations systems like GPS and to accurate physical measurements. Improvements in laser cooling and the development of frequency combs have combined to enable the construction of clocks using optical reference transitions, which are more stable than the Cesium standard with references in the microwave re
This paper consists of a literature study and laboratory experiments of magnesium oxide boards, from Swedish suppliers, that is a part of a larger research project. Lately the boards have become known for the way they absorb moisture which has led to damage on adjacent materials. The boards are inorganic and are marketed as moisture proof. The purpose of the larger research project is to identify
Fastighetsbildningsverksamheten står inför ökad digitalisering som en del av en digital samhällsbyggnadsprocess. Mot bakgrund av detta gör Lantmäteriets Fastighetsbildning en översyn av den nuvarande intäktsmodellen för verksamheten och som en del av detta arbete behöver den nuvarande prisbilden undersökas närmare. I detta examensarbete undersöks priskorrelerande faktorer i anläggningsförrättningaProperty formation operation is facing increased digitalization, as a part of integration of digitalization in built-environment practices. In the light of this, the National Land Survey of Sweden’s property formation division is doing an overhaul of their current revenue model. As a part of this overhaul, there is a need to investigate the present price driving factors in the agency’s operations.
Under de senaste decennierna har friformsframställning, även benämt som 3D-utskrift, utvecklats snabbt inom både industri- och hobbyområdet. När nya applikationer upptäcks måste både material och metoder undersökas och utvecklas i samma takt för att inte hämma den kreativitet som 3D-utskrift framkallar. Materialet som vanligast används i 3D-skrivare är i filamentform, vilket produceras i storskali
The aim of this thesis is to explore the relative importance of the eight psychological Active Innovation Resistance (AIR) barriers, from the new typology of AIR barriers developed from Talke and Heidenreich in 2014, on the consumer’s intention to adopt or buy circular fashion products. Moreover, this thesis examines whether the socio-demographic factors of age, employment status, and educational
The purpose of this study is to test the sustainable development of Costa Rica between 1890 and 2015 based on Genuine Savings. The Genuine Savings estimations are composed of indicators on fixed capital, natural capital, and human capital. Indicators for this study were built with data from several sources including local and international projects, as well as governmental data. The data was then
The topic of this study is to develop and validate an analysis method of nicotine nasal spray produced at McNeil AB. When developing the analysis method, several parameters were determined in advance to make the method more similar to other analysis methods at the company, making it more practical. However, other parameters were adjusted with the aim to improve the resolution and to fulfil the upd
Förtillverkade betongkonstruktioner har inte någon naturlig sammanhållning av stommen, som i en platsgjuten konstruktion, vilket medför stora krav på de mekaniska kopplingarna mellan de prefabricerade betongelementen avseende bärförmåga och deformationskapacitet. Dagens mekaniska kopplingar utgörs ofta av ingjutna raka kamstänger och har därför en begränsad deformationskapacitet vilket medför att Precast concrete structures has no natural coherence of the frame as when the structure is cast in situ, which puts great demands on the ties between the prefabricated concrete elements regarding the resistance and deformation capacity. The ties that are used today often consist of straight ribbed bars embedded in concrete and therefore have limited deformation capacity. This means that the opport
The European Spallation Source ERIC is a new neutron spallation source being built in Lund, Sweden, with NMX as one of the pioneer instruments. NMX is a Quasi-Laue single crystal neutron diffractometer for the investigation of large biological molecules. Wavelength, size and divergence of the neutron beam reaching the sample have to be controlled to properly match the different experimental needs.
This essay examines how eight identified negative effects influence the perceived motivation and performance of employees as a result of the current efficacious monetary incentive system. Through a multiple case study based on a qualitative research method, eight semi-structured were conducted. Afterwards the interviews were compiled in a database and analyzed. Both an inductive and deductive ap
In efforts to form resilience-building strategies and guide action across the globe, the Sendai Framework for Disaster Risk Reduction (2015) outlined four priorities, the first of which is Understanding Disaster Risk. The purpose of this research is to delve into the concept of disaster risk and see how it is understood by the duty-bearing entity tasked with reducing disaster risk (the government)
Food production is a major driver of climate change and environmental degradation. There is a political will to use public procurement as a strategic tool to promote more sustainable practices in the food industry. There are many aspects of sustainable food consumption, and one aspect that is getting increased attention is locally produced food. This study aims to examine how municipalities in the
Title: The connection between the surroundings environmental demand and the business world’s environmental work link – A study about DHLs environmental conditioning Date: 29 May 2009 Level: Bachelor’s degree in Service Management, 15 points Authors: Nina Lemic, Elaine Wendt and Björn Östman Advisor: Hervé Corvellec, Birgitta Olsson and Filippa Säwe Key words: Environmental work, DHL, contingency t
The aim of this report is to investigate the possibilities of an automated process which will identify and separate worn out granules and thus ensure an optimum cleaning performance. Research shows that some users are not following the recommendations regarding when to change Granules, leading to reduced performance and a reduction in sales. The first phase of the project involves studying how th
