Filtyp
Wildfire has become a major disturbance agent in Mediterranean area, with Galicia in the north-west of Spain having the most frequent fires. In order to combat soil erosion, different post-fire stabilization treatments can be applied, like adding different mulch materials. In a laboratory experiment we evaluated the effect of adding plant residues, commonly used in post-fire rehabilitation (wheat
A numerical approach for moisture transport in porous materials like concrete is presented. The model considers mass balance equations for the vapour phase and the water phase in the material together with constitutive equations for the mass flows and for the exchange of mass between the two phases. History-dependent sorption behaviour is introduced by considering scanning curves between the bound
Synchrotron X-ray diffraction patterns for highly crystalline MCM-41 a mesoporous silicate molecular sieve are presented. The form factor observed in seven orders of diffraction is used to show the existence of a two-layer wall structure, with a narrower mesopore than previously assumed, and much void space in the walls.
Food wastage during distribution, retail sale, and consumption is a concern of great worry. It not only affects the economics of businesses but also puts natural resources under severe stress. For example, in the UK some 800,000 tons of bakery products are purchased each year and never eaten, mainly due to short life span of the product. Earlier investigations at Lantmännen Unibake, UK have identi
The packaging market is starting to demand renewable materials to face out the fossil based materials mainly used today. This thesis investigate the possibility and advance to switch from conventional grades of polyethylene (PE) and polyethylene terephthalates (PET) towards bio-produced qualities of the same polymers. The work is divided into two parts starting with a carbon dioxide evaluation of
The accurate identification of non-metallic inclusions (NMIs) within steel matrices is critical for high-quality steel production. This study employs synchrotron radiation-based X-ray absorption photoemission electron microscopy (X-PEEM) to investigate NMIs in ultra-high-strength steels. Ca-L2,3-edge X-ray absorption spectra were acquired for six NMIs at both room temperature and 400 °C, allowing
An experimental campaign has been carried out with the aim of providing an insight into the fracture processes occurring during the cutting of different types of polymers, with features ranging from typically brittle to soft hyperelastic behaviour. The steady state of cutting is investigated using a sharp thin blade, and tracking the insertion force versus the penetration displacement. For soft, h
A computational framework for modelling damage-induced softening in fibre-reinforced materials is presented. The main aspect of this framework is the proposed non-local gradient-enhanced continuum damage formulation. At the material level, the elastic constitutive behavior is defined by a hyperelastic functional including a volumetric and an isochoric contribution. The isochoric contribution is su
n-type Mg3Sb1.5Bi0.5 has recently been discovered to be a promising thermoelectric material, yet the effective n-type dopants are mainly limited to the chalcogens. This may be attributed to the limited chemical insight into the effects from different n-type dopants. By comparing the effects of different chalcogen dopants Q (Q = S, Se, and Te) on thermoelectric properties, it is found that the chal
Quantifying the ways in which local particle rearrangements contribute to macroscopic plasticity is one of the fundamental pursuits of granular mechanics and soft matter physics. Here we examine local rearrangements that occur naturally during the deformation of three samples of 3D granular materials subjected to distinct boundary conditions by employing in situ x-ray measurements of particle-reso
Plastic waste has come to the forefront of academic and political debates as a global problem that demands an urgent solution. Promoted by policymakers, academia, and corporations alike, the circular economy model presents a viable path to reach more sustainable levels of development. Emerging and disruptive technologies can catalyse the transition to a circular economy, but their application to t
An experimental study to characterize properties controlling delamination of paperboard is presented. The normal and shear traction–separation laws are measured and evaluated using a double cantilever beam (DCB) and a split double cantilever beam (SCB) specimen. The DCB-experiments provides normal separation data in good agreement with results using alternative experimental techniques. From the me
Bio-based materials are considered to be an effective alternative to fossil-based materials and are being studied globally. It will be a long journey for the commercialisation of bio-based materials. Apart from waiting for the material technology to be mature, how will the material be rolled out to the market? This is the challenge faced by all material companies. The project is in collaboration
https://www.sljus.lu.se/research - 2026-10-11
The transition quadrupole moments. Q(t), of four weakly populated collective bands up to spin similar to 65h in Er-157,Er-158 have been measured to be similar to II eb demonstrating that these sequences are associated with large deformations. However, the data are inconsistent with calculated values from cranked Nilsson-Strutinsky calculations that predict the lowest energy triaxial shape to be as
Previously proposed high spin states in Na22,23 are compared with calculations from the cranked Nilsson model including Strutinsky renormalization. High K rotational isomers are proposed for Iπ=6- in Na22 and 11/2+, 13/2+, and possibly 15/2+ in Na23. The positive parity yrast sequences in these two nuclei are analyzed in terms of the change from collective to single particle behavior at I=9 (22Na)
Measurements of top quark spin observables in tt¯ events are presented based on 20.2 fb−1 of s=8 TeV proton-proton collisions recorded with the ATLAS detector at the LHC. The analysis is performed in the dilepton final state, characterised by the presence of two isolated leptons (electrons or muons). There are 15 observables, each sensitive to a different coefficient of the spin density matrix of
