Filtyp
At MAX IV Laboratory, the Swedish Synchrotron Radiation (SR) facility, the largest of two rings operates at 3 GeV with a bare lattice emittance of 330 pm rad. Upgrade plans are under consideration aiming at a gradual reduction of the emittance, in three stages: a short-term with an emittance reduction of 20% to 40%, a mid-term with an emittance reduction of more than 50% and a long-term with an em
Context. Transmission spectroscopy is one of the most powerful techniques used to characterize transiting exoplanets, since it allows for the abundance of the atomic and molecular species in the planetary atmosphere to be measured. However, stellar lines may bias the determination of such abundances if their center-To-limb variations (CLVs) are not properly accounted for. Aims. This paper aims to
The MAX laboratory at Lund University, Sweden, today operates an accelerator system consisting of a 100 MeV racetrack microtron and a 550 MeV storage ring (MAX I). At the moment (July 1994) a new storage ring MAX II is near completion and will start first injections within 2 months. This work gives an overview of the MAX II project including the first beamlines and a description of the accelerator
The late nineteenth and early twentieth century saw a widespread interest in Asian religion within European and American esotericism. Whereas most of that interest was directed toward India, a number of representatives of the early twentieth-century esoteric environment turned toward East Asia in order to find what they hoped to be a spiritual solution to the problems of their time. One of these i
Fetal programming may arise from prenatal exposure and increase the risk of diseases later in life, potentially mediated by the placenta. The objective of this systematic review was to summarize and critically evaluate publications describing associations between human placental changes and risk of atopic disorders during childhood. The review adhered to the Preferred Reporting Items for Systemati
When does technological change lead to inclusive prosperity? Research suggests that shared benefits from technological progress require concurrent expansions in education and support from pro-labor institutions. We contribute to the debate by studying electricity adoption in Sweden during the first decades of the 20th century. Exploiting that proximity to hydro-power plants shaped the electricity
Three methods were developed for preparing alginate gels containing cells that are stable in phosphate containing media. In Method I preformed alginate beads containing entrapped cells were treated with polyethyl eneimine followed by glutaraldehyde. In Method II alginate sol was treated with a carbodiimide and N-hydroxysuccinimide (to form active esters), mixed with cells and extruded into calcium
This technical report gives an overview of our submission to task 3 of the DCASE 2024 challenge. We present a sound event localization and detection (SELD) system using input features based on trainable neural generalized cross-correlations with phase transform (NGCC-PHAT). With these features together with spectrograms as input to a Transformer-based network, we achieve significant improvements o
The purification of crude (60.89% pure) paclitaxel was developed for high purity and yield. Several solvent systems, including methanol (MeOH), acetone, tetrahydrofurane, n-hexane, and water, were evaluated for precipitation efficiency. The best results were obtained using a mixture of MeOH and water, which was very effective at removing polar impurities, yielding a precipitate with 90.87% purity.
Modeling metalloproteins often requires classical molecular dynamics (MD) simulations in order to capture their relevant motions, which in turn necessitates reliable descriptions of the metal centers involved. One of the most successful approaches to date is provided by the "cationic dummy model", where the positive charge of the metal ion is transferred toward dummy particles that are bonded to t
This work investigates the design of beampatterns for frequency diverse arrays-multiple-input multiple-output (FDA-MIMO) in the range-angle plane, in order to improve the approximation of a desired beampattern. Recognizing that the energy radiated by the array cannot be locked at a fixed range and angle, the beampattern is designed for the equivalent beampattern at the receiving end, differing fro
We present the electrical and mechanical design of a button beam position monitor (BPM) recently developed and installed in the UVX electron storage ring at the Brazilian Synchrotron Light Laboratory (LNLS). The first characterization results will also be presented. This development started when we observed strong correlation between false stripline BPM readings and the external temperature of thi
Convex maps were first introduced by Hillier and Hanson in "The social logic of space", and have since become a standard diagram of space syntax, particularly in the analysis of interior of buildings. Despite of their extensive use, the computer generation of convex maps turns out to be quite difficult. An algorithmic description of the process would afford an objective form of reproducing analysi
The utilization of industrial side streams for generating value has always been of interest, but in today's society, with a high focus on the circular economy, it is becoming increasingly important. Lime mud (whose major component is calcium carbonate, CaCO3) is a low-value by-product of the pulp and paper industry that is generated in considerable amounts during the causticizing process. Designin
This study is concerned with the shared object manipulation problem in a physical Human-Robot Interaction (pHRI) setting. In such setups, the operator manipulates the object with the help of a robot. In this paper, the operator is assigned with the lead role, and the robot is passively following the forces/torques exerted by the operator. We propose a controller that is free from the well-known tr
There have been some advances in multivariate control charts in recent years. This paper presents a new simultaneous scheme for monitoring both the mean and variability of a multivariate normal process in a single chart, which is developed by improving and modifying another recently proposed scheme. We not only propose a new control scheme but also make it adaptive by varying all control chart par
This study develops a strategic framework to guide the adoption of Industry 4.0 technologies across various business sectors. Using a mixed-methods approach, the research combines an extensive literature review with empirical investigations, including case studies and surveys with industry practitioners. The framework integrates advanced digital technologies, such as artificial intelligence and im
