Sökresultat

Behandlar gipsavgjutningarnas ställning och roll i konstutbildningen och på konstmuseerna från 1700-talet till 1914.

The use of a polar diagram method for describing and evaluating the machinability of Inconel 718 was explored. Five key parameters of the work material, representing the mechanical and physical properties which have strongest influence on its machinability, were employed in the diagrams. These five parameters were integrated into a single polar diagram, used to describe the machinability of Incone

Encyclopedic entry on Mary Wollstonecraft's social and political philosophy

Purpose: To investigate the inflammatory response of current and future potential vitreous substitutes in an experimental in vivo vitrectomy model. Methods: Twenty-five gauge pars plana vitrectomy was performed in the right eye of 60 pigmented rabbits, with subsequent injection of 0.5–1.0 ml of Healaflow® (cross-linked hyaluronic acid, n = 12), Bio-Alcamid® (polyalkylimide, n = 8), silicone oil (n

In the early seventies Paola Zancani Montuoro suggested that a large paved structure, which had recently been uncovered at the site of Sybaris/Thourioi in southern Italy, was the remains of an ancient neosoikos, or shipshed. This idea quickly gained widespread acceptance and is still often repeated, despite some objections having been raised. In this paper it is argued that the structure, which ca

Swedish archaeologists have been working in Pompeii since 2000. Our fieldwork has consisted mainly of the study of standing walls and cleared floor levels in a city block unearthed in the 19th century and of the production of a comprehensive documentation, presented in an open access publication: www.pompejiprojektet.se/insula.php. The perspective of the present paper is the insula as a whole. Its

The aim of this study was to compare single-and twin-shaft oxy-fuel gas turbines in a semiclosed oxy-fuel combustion combined cycle (SCOC-CC). This paper discussed the turbomachinery preliminary mean-line design of oxy-fuel compressor and turbine. The conceptual turbine design was performed using the axial through-flow code LUAX-T, developed at Lund University. A tool for conceptual design of axia

The traditional orthosis are tight and allow minimal evaporation. A new prototype was designed. The thermal foot model tests were carried out at isothermal (Ts=Ta=34 °C) and non-isothermal (Ta=23 °C) conditions with relative humidity set to 17 and 41 %, respectively, and at air velocities of 0.25 (LVa) and 0.85 m/s (HVa). Evaporative resistance (Ret) was calculated based on foot model’s heat loss