Sökresultat

5-Hydroxymethylfurfural (HMF), a product of catalytic dehydration of C6 sugars, is a versatile and key renewable platform chemical. The possibility to use a high substrate concentration with high yield in a single-solvent system is one of the solutions to reduce solvent usage, energy consumption, reaction volume, and operating cost. A heterogeneous catalyst and single-solvent system were employed

Mixing in ice covered lakes is caused by through-flow currents, oscillations of the ice cover and by convective currents induced by heat flow from the sediments or by solar radiation penetrating the ice. Mainly from studies in Swedish lakes, current velocities and mixing coefficients are quantified for the different processes generating water movement. Seiche movement caused by wind induced oscill

Research shows that a significant portion of the environmental impact from products is determined already in the design phase. Implementation of principles of Circular Economy (CE) in design practice has the potential to reduce waste and to encourage reuse of resources. Since designers are responsible for the design process, it is therefore relevant to investigate whether designers are properly eq

For over 30 years GIS has been a major theme in archaeology, leading scholars to debate the way geo-spatial platforms can contribute to a better understanding of the ancient landscape and a more thorough interpretation of the archaeological record. Recently, the introduction of more advanced software and hardware solutions have made it possible to use GIS for visualizing and analysing even geometr

We study the process of charged polymer translocation, driven by an external electric potential, through a narrow pore in a membrane. We assume that the number of polymer segments, m, having passed the entrance pore mouth, is a slow variable governing the translocation process. Outside the pore the probability that there is an end segment at the entrance pore mouth, is taken as the relevant parame

In this study we investigate the effect of programmed cross-flows on the error in the hydrodynamic radii (r(h)) determination with asymmetrical flow field-flow fractionation (AsFlFFF). Three different standard polystyrene particles (nominal radii of 30 and 40 and 50nm) are fractionated with exponentially and linearly decaying cross-flows with different decay rates. Hydrodynamic radii are calculate

In arid and semi-arid areas, hydrosphere and biosphere suffer maximal disturbance and impacts of mankind during the development and utilizing processes. These impacts interact with each other and exert hostile effect on the environment. The transformation of the ecological environment depends mainly on the exploitation of water resource, economic development and the relative balance of environment

This study investigated the effect of glow discharge treatment of titania surfaces on plasma protein adsorption, by means of ellipsometry and mechanically assisted SDS elution. The adsorption and film elution of three plasma proteins, viz. human serum albumin (HSA), human immunoglobulin G (IgG) and laminin-1, as well as competitive adsorption from a mixture of the three proteins, showed that the a

Phase diagrams of poly(ethylene glycol)/polyacrylate/Na(2)SO(4) systems have been investigated with respect to polymer size and pH. Plasmid DNA from Escherichia coli can depending on pH and polymer molecular weight be directed to a poly(ethylene glycol) or to a polyacrylate-rich phase in an aqueous two-phase system formed by these polymers. Bovine serum albumin (BSA) and E. coli homogenate protein

The reduction of the (A root 5x root 5)R27 degrees surface oxide on Pd(100) and Pd75Ag25(100) surfaces by CO has been investigated by high-resolution X-ray photoelectron spectroscopy in combination with kinetic analysis using the Avrami-Erofeev theory. For both surfaces we observed faster reduction with increasing temperature. Kinetic analysis indicates that the reduction process is phase boundary

Fluorescence microscopy is introduced as a low cost quality control process for nanoimprint lithography. To depict imprinted structures down to 1 mum lateral size and to detect residues down to 100 nm lateral size, the standard printable polymer mr-18000 is labelled with less than 0.1 wt.% fluorescent dye. Three different types of stamps are used to determine the dependence of the shape and size o

The denitrification process was studied in a stirred lab-scale suspended carrier biofilm reactor at low temperatures (3–20°C). The reactor was filled to 50% with Kaldnes K1 carriers. The denitrification rate showed only a rather weak dependence on the temperature, the rate at 3°C being approximately 55% of that at 15°C. The maximum denitrification rate obtained at 15°C was 2.7 g NOx−-N m−2 carrier

Abstract Clinical measurements are necessary in many routine follow-ups and scientific evaluations, but the accuracy of these measurements is seldom challenged. The size of the reconstructed ear is one important parameter in the follow-up regarding patients operated on due to microtia. With the introduction of digital morphometry one was obliged to evaluate its accuracy in comparison to its analog

During the last decade, software process simulation has been used to address a variety of management issues and questions. These include: understanding; training and learning; planning; control and operational management; strategic management; process improvement and technology adoption. This paper presents a simulation model that was developed to demonstrate the impact of unstable software requir