Sökresultat

Every year, 100,000 tons of dissolved hemicelluloses are discharge unused with wastewater from thermomechanical pulp mills around the world. Isolation of these hemicelluloses from the wastewater would not only reduce the treatment costs for the pulp mills but would also provide an excellent raw material for high value applications such as oxygen barriers in food packaging. The isolation of the he

Degradation of phenol and o-, m- and p-cresol at a concentration of 150 mg; l(-1) of each compound was studied in a suspended-carrier biofilm process consisting of two aerobic stages. The fungus Mortierella sarnyensis Mil'ko dominated the microflora. in the first reactor, while bacteria dominated in the second reactor. The process was studied at 4, 7, 11 and 15 degreesC. The results from the exper

Two typical configurations of solid oxide fuel cells (SOFCs) are planar cross-flow and tubular counter-flow. Even though their performance is based on the same physical principles, their operation characteristics and parameters vary considerably due to different geometries. The goals of this paper are to detect the particularities of the cell geometries at transient operation and to identify their

Several valuable substances are released from wood during the production of thermomechanical pulp. These substances can be isolated and purified for use as value-added chemicals. The hemicellulose galactoglucomannan (GGM) has attracted a great deal of interest because of its possible applications as an oxygen barrier film in packaging materials, as a hydrogel in biomedical products and as an emuls

Stamceller ska göra hjärnan ung och frisk – Vetenskap och Hälsa Hoppa till innehåll Vetenskap och hälsa Populärvetenskapligt om medicinsk forskning i Skåne Teman Podd Tidskrift Prenumerera Om webbplatsen Kontakt Sök Sök Stamceller ska göra hjärnan ung och frisk 2017-05-29 ⚠️ Den här artikeln är mer än 5 år gammal. Nya forskningsrön kan ha tillkommit. De flesta av oss känner till någon med demens,

https://www.vetenskaphalsa.se/stamceller-ska-gora-hjarnan-ung-och-frisk/ - 2026-07-12

njursjukdom – Vetenskap och Hälsa Hoppa till innehåll Vetenskap och hälsa Populärvetenskapligt om medicinsk forskning i Skåne Teman Podd Tidskrift Prenumerera Om webbplatsen Kontakt Sök Sök Etikett: njursjukdom Föreläsning om njursjukdom: Njurhälsa för alla överallt 2019-03-12 Välkommen till en föreläsning om njursjukdom! NÄR? Torsdag den 14 mars 2019, kl 17.30-20.20, VAR? Jubileumsaulan, Jan Wald

https://www.vetenskaphalsa.se/tag/njursjukdom/ - 2026-07-12

njursvikt – Vetenskap och Hälsa Hoppa till innehåll Vetenskap och hälsa Populärvetenskapligt om medicinsk forskning i Skåne Teman Podd Tidskrift Prenumerera Om webbplatsen Kontakt Sök Sök Etikett: njursvikt Ökad kunskap om hormonsystemet ger diabetesforskare nya svar 2023-02-03 Hur mycket vatten behöver vi dricka för att vi ska hålla oss friska? Vilken effekt får olika dieter på ämnesomsättningen?

https://www.vetenskaphalsa.se/tag/njursvikt/ - 2026-07-12

The aim of this article is to present the archival practice behind two extensive research projects that we have worked on during the last decade: the Stockholm Film Workshop and minor immigrant filmmaking in Sweden. Archive has become a general catchword in today’s academia that encompasses several practices of collecting, storing, distributing and displaying. We will stress in particular – partly

Chloride anations of PtCl5H2O−, trans-PtCl4(H2O)2 and trans-Pt(CN)4ClH2O− in the presence of PtCl42− have been studied at 50°C in 1.00M perchloric acid medium. It is shown that PtCl5H2O− is formed as the primary reaction product in the two last-mentioned anations. This is not compatible with the generally used mechanism for platinum(II)-catalyzed platinum (IV) substitutions, which gives PtCl62− as

Membrane hybrid processes-coagulation coupled with ultrafiltration (UF)-have become a common method to comply with the legal, chemical, and microbiological requirements for drinking water. The main advantages of integrating coagulation with membrane filtration are the enhanced removal of natural organic matter (NOM) and reduced membrane fouling. With in-line coagulation, coagulants are patched int

Cardiovascular diseases are among the most important causes of death in thedeveloped countries. These diseases are partly caused by too high cholesterolconcentrations in the blood. Avena sativa, oat, is the most common spieces of the genus Avena, and produced in huge amounts worldwide. Oats have been shown to have cholesterol-lowering properties since the 1960s. This property was originally attrib

How to make a workplace health promotion questionnaire process applicable, meaningful and sustainable Background In workplace health promotion, a questionnaire could be of great use. Unfortunately, fatigue regarding answering questionnaires has recently become greater than before. An action research approach could be a possible way of increasing employee participation. Aim This study reports an at

In the production of pulp and paper, water-soluble components, such as hemicellulose, monosaccharides, and lignin, are released and accumulate in the process water. The process water is usually concentrated and incinerated for heat generation and the recovery of pulping chemicals, such as in the Kraft and sulfite processes. The growing trend toward a more sustainable forest industry has increased

Hemicelluloses dissolved in thermomechanical pulp (TMP) mill process streams can be used to manufacture high-value-added products. The molecular mass of the dissolved hemicelluloses is about 10 kDa. In some applications, it would be beneficial with larger molecules. It was therefore investigated whether it is possible to increase the size of hemicelluloses isolated by microfiltration and ultrafilt

Intermittent turning the slotted workpieces is always accompanied with a high impact load of the machine tool during the entry phase of the cutting edge. The process leads to a strong dynamic response of the system and results in vibrations arose and potential tool life and surface finish issues. The present study addresses the modeling of cutting force build-up process with further optimization o