Filtyp
The aim of this study was to find models for turbulent fragmenting forces in the high-pressure homogeniser from data available in Computational Fluid Dynamics (CFD) simulations with Reynolds Averaged Navier Stokes (RANS) turbulence models. In addition to the more common RANS k-epsilon turbulence models, a Multi-scale k-epsilon model was tested since experimental investigations of the geometry impl
This paper presents the elaboration of an experimentally validated model of a continuous cross-flow atomic layer deposition (ALD) reactor with temporally separated precursor pulsing encoded in the Modelica language. For the experimental validation of the model, in situ quartz crystal microbalance (QCM) diagnostics was used to yield submonolayer resolution of mass deposition resulting from thin fil
Despite its long history, the Theory of Characteristic Modes has only been utilized in antenna design for perfect electric conductors. This is due to computational problems associated with dielectrics and magnetic materials. In particular, the symmetric form of the PMCHWT surface formulation for the Method of Moments (MoM) solves for both external (real) and internal (non-real) resonances of a str
In this paper, we present a new approach to conservative bounding of displaced Bézier patches. These surfaces are expected to be a common use case for tessellation in interactive and real-time rendering. Our algorithm combines efficient normal bounding techniques, min-max mipmap hierarchies and oriented bounding boxes. This results in substantially faster convergence for the bounding volumes of di
Seven aliphatic dicarboxylic acids (C3-C9) along with phthalic acid, pinic acid and pinonic acid were determined in 35 aerosol (PM10) samples collected over the year at Vavihill sampling station in south of Sweden. Mixture of dichloromethane and methanol (ratio 1:3) was preferred over water for extraction of samples and extraction was assisted by ultrasonic agitation. Analytes were derivatized usi
Since the emulsification in the High-Pressure Homogenizer (HPH) is controlled by hydrodynamic forces, the turbulent flow field in the valve region is of significant interest. Computational Fluid Dynamics (CFD) simulations have been used for this in many studies. However, there are reasons to question if the utilized turbulence models, with their inherent assumptions and simplifications, could accu
BACKGROUND: Changes in glycosylation of serum proteins are common, and various glycoforms are being explored as biomarkers in cancer and inflammation. We recently showed that glycoforms detected by endogenous galectins not only provide potential biomarkers, but also have different functions when they encounter galectins in tissue cells. Now we have explored the use of a combination of two galectin
In this paper we address the problem of translating high-level stream programs, such as those written in MPEG's RVC-CAL dataflow language, into implementations in programmable hardware. Our focus is on two aspects: sufficient language coverage to make synthesis available for a large class of programs, and methodology and tool support providing analysis and guidance to improve and optimize an initi
From a control design point of view, modern diesel engines are dynamic, nonlinear, MIMO systems. This paper presents a method to find low-complexity black-box dynamic models suitable for model predictive control (MPC) of NOx and soot emissions based on on-line emissions measurements. A four-input-five-output representation of the engine is considered, with fuel injection timing, fuel injection dur
Partitioning and mapping are important design decisions in exploiting the parallelism of programs that are to be run on systems with multiple processing elements. In this paper we introduce a fast, incremental approach for mapping dynamic dataflow programs to multiprocessor systems. We use causation traces and architecture descriptions as input for the mapping process that devises several heuristi
Particle image velocimetry is performed on a model of a high pressure homogenizer, scaled for qualitative similarity of the one phase turbulent flow field in a production scale homogenizer. Flow fields in gap entrance, gap and gap outlet chamber are obtained with high resolution. The measurements show gap flow development and formation of a turbulent wall adherent jet when exiting into the outlet
We present a new method for real-time render- ing of multiple recursions of reflections and refractions. The method uses the strengths of real-time ray tracing for objects close to the camera, by storing them in a per-frame constructed bounding volume hierarchy (BVH). For objects further from the camera, rasterization is used to create G-buffers which store an image-based representation of the sce
Abstract in UndeterminedThis paper describes a methodology for the optimization of portable parallel signal processing applications specified by dataflow programs. The use of dataflow as a programming model for signal processing applications targeting parallel platforms provides an important advantage versus the traditional sequential programming paradigm: the portability of parallelism. The paper
Popular Abstract in Swedish Den arbetsrehabilitering som traditionellt erbjuds personer med psykisk funktionsnedsättning kan beskrivas som en trappa där varje steg består av olika åtgärder för att öka personernas arbetsförmåga. Målet är att personerna successivt skall bli friskare, öka sin funktionsnivå och utveckla fler färdigheter innan de kan ta steget ut till ett konkurrensutsatt arbete. För pIn the light of the limited research on the subject of Individual Placement and Support (IPS) in a Swedish context, this thesis has contributed with knowledge of the effectiveness and experiences of IPS among persons with severe mental illness (SMI) living in Sweden. The thesis has also provided information about the work motivation among those persons with SMI who seek vocational support by IPS.
Edge aliasing continues to be one of the most prominent problems in real-time graphics, e.g., in games. We present a novel algorithm that uses shared memory between the GPU and the CPU so that these two units can work in concert to solve the edge aliasing problem rapidly. Our system renders the scene as usual on the GPU with one sample per pixel. At the same time, our novel edge aliasing algorithm
Dataflow descriptions are a natural match to application areas such as signal processing, cryptography, networking, image processing, and media coding. This paper addresses the problem of efficiently executing the basic elements of a dataflow program, its actors, written in a language such as MPEG's RVC-CAL. Using actor machines as an execution model for dataflow actors, we devise a metric for mea
There is increasing interest in the use of arbuscular mycorrhizal fungi (AMF) for ecological restoration, as AMF can improve plant nutrition and growth. However, some AMF can have negative effects on plant growth. It is therefore critical that restoration strategies incorporate appropriate AMF. This research investigated differences in growth and survival of Podocarpus cunninghamii (mountain tōtar
This paper presents the development of a non-dimensional model of a continuous cross-flow atomic layer deposition (ALD) reactor with temporally separated precursor pulsing and a structured model-based methodology for scaling up the substrate dimensions. The model incorporates an ALD gas–surface reaction kinetic mechanism for the deposition of thin ZnO films from Zn(C2H5)2 and H2O precursors that w
A fundamental part of many computer algorithms involves traversing a binary tree. One notable example is traversing a space-partitioning acceleration structure when computing ray-traced images. Traditionally, the traversal requires a stack to be temporarily stored for each ray, which results in both additional storage and memory-bandwidth usage. We present a novel algorithm for traversing a binary
