Filtyp
In this paper, channel measurement campaigns at center frequency of 72 GHz with 2 GHz bandwidth conducted by Huawei company are introduced. The transmitter and receiver make use of similar horn antennas which are rotated step by step in the directional domains to capture the frequency spectra of spatial channels in line-of-sight and non-line-of-sight scenarios of indoor environments. The data is a
In this paper, a recently conducted measurement campaign for high-speed-train (HST) channels is introduced, where the downlink signals of an in-service Universal Mobile Terrestrial System (UMTS) deployed along an HST railway between Beijing and Shanghai were acquired. The channel impulse responses (CIRs) are extracted from the data received in the common pilot channels (CPICHs). Within 1318 km, 14
In this paper, a novel fingerprint-based localization technique is proposed, which is applicable for positioning user equipments (UEs) in cellular communication networks such as the long-term-evolution (LTE) system. This technique utilizes a unique mapping between the characteristics of a radio channel formulated as a fingerprint vector and a geographical location. A feature-extraction algorithm i
In this paper, a measurement campaign for massive multiple-input multiple-output (MIMO) channel characterization in both line-of-sight (LoS) and non-LoS outdoor environments is introduced. The measurements are conducted at the center frequency of 15 GHz with a bandwidth of 4 GHz. A virtual 40× 40 planar antenna array formed by stepping a vertically-polarized bi-conical omni-directional antenna (OD
The Unmanned Aerial Vehicle (UAV) is going to play an important role in fifth generation communication systems for establishing seamless coverage in various scenarios due to its low-cost and flexibility. Understanding the UAV wireless channels is the basis for its application. In this paper, a recently conducted measurement campaign for the UAV wireless propagation channel in a suburban scenario i
Recently, a measurement campaign for characterizing time-variant radio channels in city-canyon environments was conducted along a 2-km-long pedestrian shopping street in Shanghai. A passive sounding approach was adopted where a software-defined-radio platform is used as a receiver (Rx) to record downlink signals transmitted by base stations (BSs) in an in-service Universal Mobile Telecommunication
Recently, a measurement campaign for characterizing the channels in underground subway environments was conducted in Shanghai, China. Downlink signals transmitted by 46 universal mobile telecommunication system cells deployed along a 34-km-long subway were collected. Channel impulse responses are extracted from the data received in the common pilot channels, based on which parameters of multipath
In this contribution, a measurement campaign for high- speed-train (HST) channel is introduced where the down- link signals of in-service Long Time Evolution-Advanced (LTE-A) network deployed along the HST railway between Beijing to Shanghai are acquired. Channel impulse responses (CIRs) are extracted from received signals, and concatenated power delay profiles (CPDPs) are illustrated. According t
In this paper, a measurement campaign in high-speed-train (HST) environments is introduced where the downlink signals of an in-service Universal Mobile Terrestrial System (UMTS) deployed along a HST railway between Beijing and Shanghai were required by a single receiving antenna. Channel Impulse Responses (CIRs) are extracted from the data received in Common PIlot CHannels (CPICHs). The train spee
In this paper, a recently conducted measurement campaign for High-Speed-Train (HST) channels is introduced where the down-link signals of in-service Long Time Evolution-Advanced (LTE-A) networks deployed along a HST railway between Beijing to Shanghai were acquired. The channel impulse responses (CIRs) are extracted from the received Cell-specific Reference Signals (CRSs). The results show that, m
In this contribution, a recently conducted measurement campaign in underground subway environments is introduced. The downlink signals in an in-service UMTS network are collected in the subway carriage by using an Universal Software-defined Radio Peripheral (USRP) equipment and used to extract the channel impulse responses (CIRs) between a user equipment and UMTS stations. A high-resolution parame
Cellular-connected unmanned aerial vehicles (UAVs) have recently attracted a surge of interest in both academia and industry. Understanding the air-to-ground (A2G) propagation channels is essential to enable reliable and/or high-throughput communications for UAVs and protect the ground user equipments (UEs). In this contribution, a recently conducted measurement campaign for the A2G channels is in
Unmanned Aerial Vehicles (UAVs) have been widely used in military and civilian fields in the recent years. In order to give support to the vast amount of added value services, UAV communications have become a hot spot for the fifth generation (5G) and have a very broad development prospect. In this paper, based on the channel modeling results obtained by actual measurements, we evaluate the end-to
During the last few years, with the decrease of their sizes and costs, Unmanned Aerial Vehicles (UAVs) became more feasible for their use in general-purpose applications. As an important basis for UAV applications, the Air-to-Ground (A2G) radio propagation channel has gained attention in the channel modeling literature. However, whereas the A2G propagation channel is inherently dynamic (time-varyi
We propose a multivariate log-normal distribution to jointly model received power, mean delay, and root mean square (rms) delay spread of wideband radio channels, referred to as the standardized temporal moments. The model is validated using experimental data collected from five different measurement campaigns (four indoor scenarios and one outdoor scenario). We observe that the received power, th
Due to the decrease in cost, size, and weight, unmanned aerial vehicles (UAVs) are becoming more and more popular for general-purpose civil and commercial applications. Provision of communication services to UAVs both for user data and control messaging by using off-the-shelf terrestrial cellular deployments introduces several technical challenges. In this article, an approach to the air-to-ground
This paper investigates the wideband channel characteristics obtained in a classroom and a hall indoor scenarios at 2-4, 9-11 and 27-29GHz. A virtual uniform circular array (UCA) based channel sounding system was utilized to capture wideband spatial channel characteristics. The propagation parameters of multipath components (MPCs) were estimated by using a high resolution parameter estimation (HRP
In parallel with the decrease in cost, size and weight of Unmanned Aerial Vehicles (UAVs) and the increase of their flight autonomy, many commercial applications are rapidly arising. Most of those applications rely on a communications system between a terrestrial base station and the UAV. Due to the UAV movement, time-variant channel models are required. In this article, we propose a geometrical m
In a wireless communication system, the radio propagation channel is a complicated component to characterise. Channel sounding equipment thus has to meet specific criteria to extract the desired channel parameters. In this study, the authors outline the development and validation of a vector network analyser (VNA) based channel sounder for the frequency range from 1 to 50 GHz using radio-over-fibr
Millimeter-wave with ultrawide bandwidth available and ability to pack massive number of antennas in a small area is considered the key enabler for future generation communication systems. Accurate understanding and modeling of the ultrawideband propagation channel with large-scale array configuration is essential. In this contribution, a realistic spherical-propagation signal model considering th
